Disposable Ultrasonic Mask Making Machine

Disposable Ultrasonic Mask Making Machine

Details
The thermal/ultrasonic conductivity is strong, so the welding and cutting effect of the product is guaranteed to be beautiful.
Category
Disposable Mask Making Machine
 
Send Inquiry
Description
Technical Parameters

Disposable ultrasonic mask making machine Description:

Disposable ultrasonic mask making machine  make diposable mask .It application for medical ,hospital and daily life use .It adopt the ulatrasonic and mold to welding the material .The disposable ultrasonic mask making machine speed is very fast .You can link with welidng machine and also with packing machine .

Mask machine main specification.

 

Mode of product

AT-166

Production capacity

10-70 pcs/min

Machine air pressure

0.6Mpa/0.8Mpa

Machine power

10.5KWS

Machine size

(L)4842mm*(W)3554mm*(H)2000mm

Machine weight

1050KGS

Control mode

PLC

Power supply

200V 50/60Hz.

 

 

More working Theory

Plane face mask machine, this machine is used for automatic production of multi-layer material face mask body special equipment.Can use 2-3 layers PP spunbonded non-woven cloth, activated carbon, filter cotton.The whole machine from the raw material into the nose line insertion, sealing, cutting finished products are a line of automatic operations

 

Automatic feeding system folding of plane face mask machine

1. Aluminum alloy frame, strong and beautiful, to ensure the size of finished products accurate;

2. Stainless steel fixture, adjustable from left to right;

3. Set the tensioning wheel, adjust the tensioning degree of the cloth, so as to effectively ensure the beauty and flatness of the finished product;

4. Independent nose line conveying group for easy adjustment and maintenance.

Ii. Folding molding system (lihanhongda ultrasonic mask machine)

1. Plug-type folding device, simple and quick adjustment

2. Large diameter welding wheel can effectively reduce product deformation.

Iii. Folding of ultrasonic heat closing system

1. Titanium alloy mold

In most masks machinery manufacturers use aluminum alloy, and he and actively advocate mechanical masks have provided customers to use titanium alloy mold, because relative to the easy oxidation of aluminum alloy, easy to burst, is not suitable for A long period of time the cargo operation, short service life, such as faults, the advantages of titanium alloy is obvious: a. toughness, suitable for long hair vibration;

B. The thermal/ultrasonic conductivity is strong, so the welding and cutting effect of the product is guaranteed to be beautiful;

C. High hardness, not easy to crack, deformation and rust;

D. Although the cost is about twice as much as that of aluminum alloy, considering the whole production benefit, the choice of titanium alloy mold is obviously better than aluminum alloy.

2. Imported ultrasonic transducer, 20K international frequency standard, more powerful and stable output;Together with two sets of ultrasonic system, effectively ensure the product welding quality.

3.PLC program controls the movement of the whole machine to reduce the operation difficulty of users.

A plane mask of good quality, to a large extent, need to start from the production. A plane mask machine with advanced technology, equipped with good quality materials, through a high quality, efficient mask production process, the production of the plane mask will never let you down!The plane mask machine and automatic mask production equipment produced by our company are of high quality and high efficiency. The stable production speed is up to 50-70 pieces per minute, and the production process is fully automated to avoid manual secondary pollution and ensure the quality.

 

Advantages and characteristics of the production line:

1.1. Small size, small footprint, aluminum alloy structure, beautiful, strong and rust-free

2.2. High stability, low failure rate and good accuracy.

3.3. Computer PLC programming control, servo drive, high degree of automation.

4.4. Photoelectric (optical fiber) testing raw materials, avoid mistakes and reduce waste.

5.5. The camera is a dual-machine mask, compared with the single-machine mask machine, high efficiency, with automatic packaging line, greatly save manpower and material resources.

 

Plant installation requirements:

Ground load bearing: less than or equal to 500KGS/ m2.

Working power :220V+/ -5%, 50Hz, rated power about 15KW(including packaging machine)

Operating environment: temperature 10-35 degrees, humidity 3-35%HR, no flammable corrosive gas, no dust, sterile workshop.

Compressed air: 0.5-0.7mpa, using flow rate 300L/ min

 

Some factory machine photo reference .

107_A

DAPIAN

 

Hot Tags: disposable ultrasonic mask making machine, China, manufacturers, suppliers, factory, wholesale, price, Automatic Nonwoven Mask Making Machine, Disposable Surgical Mask Making Machine, Disposable Medical Mask Making Machine, 3 Ply Face Mask Making Machine, Blank Face Mask Making Machine

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!