Your Premier Mask Making Machine Manufacturer
We located in Ruian City, China. We are specialized in produce kinds of packing machine and parts manufacturer who composed of research, development, production and market sales.
-
![Disposable Ultrasonic Mask Making Machine]()
Disposable Ultrasonic Mask Making MachineThe thermal/ultrasonic conductivity is strong, so the welding and cutting effect of the product is guaranteed to be beautiful.view more -
![Blank Face Mask Making Machine]()
Blank Face Mask Making MachineThe mask piece is output by conveyor belt, the speed is adjustable, the piece is orderly, the product quality is stable, the operation is convenient and the production efficiency is high.view more -
![Disposable Surgical Mask Making Machine]()
Disposable Surgical Mask Making MachineMan-machine interface touch screen control, built-in time, total output, daily output, set the number of automatic alarm and shutdown, digital keys to adjust the chip speed.view more -
![Disposable Medical Mask Making Machine]()
Disposable Medical Mask Making MachineThe mask piece is output by conveyor belt, the speed is adjustable, the piece is orderly, the product quality is stable, the operation is convenient and the production efficiency is high.view more -
![3 Ply Face Mask Making Machine]()
3 Ply Face Mask Making MachineThe mask piece is output by conveyor belt, the speed is adjustable, the piece is orderly, the product quality is stable, the operation is convenient and the production efficiency is high.view more -
![Automatic Disposable Mask Making Machine]()
Automatic Disposable Mask Making MachineBrake two type .One type is Suspension belt brake.this device use for bigger material have four sets . Other type is Hand suspension nylon brake system have four sets .view more -
![Automatic Outer Earloop Mask Production Line]()
Automatic Outer Earloop Mask Production LineThe machine can produce 1-4 layers of non-woven body masks. Specifications can be adjusted. It can produce 125-180 mm long and 80-110 mm wide masks.view more -
![Automatic Inner Earloop Mask Production Line]()
Automatic Inner Earloop Mask Production Line1.Mask finished product size :175*95mmview more
2.Easy operation
3.Full automatic -
![Automatic Outer Mask Production Line]()
Automatic Outer Mask Production LineWe will adjust the machine before we deliver to you, make sure the machine is in perfect condition,also we will send you video and manual to teach you how to use the machine.view more -
![Automatic Mask Production Line (1+2)]()
Automatic Mask Production Line (1+2)Automatic mask production line 1+2 can produce 1-4 layers of non-woven body masks. It adopt one blank face mask making machine with two set earloop welding machine .This machine speed can up...view more -
![Automatic Mask Production Line (1+3)]()
Automatic Mask Production Line (1+3)The machine uses manual rubber band to place in the conveyor belt box. The rubber band at both ends of the mask automatically conveys shearing.view more -
![Automatic N95 Folding Mask Making Machine]()
Automatic N95 Folding Mask Making MachineQ: Are you a factory or trading company?view more
A: We are factory.we specialized in mask making machine and packing machine.
Q.How do you install machine, is there any instruction?...
Why Choose Us
Our Product
Packing machine, mask making machine, packing machine parts, sealing machine and labeling machine, filling machine and so on.
Sales Market
Our machines are sold worldwide.
Quality Assurance
All machines undergo an aging test lasting 7 to 24 hours before shipment to ensure they operate perfectly in the customer's production environment.
Our Service
We are 24 hours online for sales. We provide online aftersales service, if you need install and operation in your country we also can send you engineer.
Data
|
Model |
DPJ |
|
Power supply |
3kw(220V 3 PHASE 50HZ) |
|
Max Speed |
180-210 pcs/min |
|
Total weight |
850 kg |
|
Machine size |
2100×600×1200mm（L*W*H） |
|
Feeding rack size |
1700×600×1400mm（L*W*H） |
|
Conveyor size |
2800×350×910mm（L*W*H） |
• Automatic raw material deployment, automatic transportation, nose bar cutting, mask edge welding,
ultrasonic fusion, forming cutting, ear line welding, etc. are all made into automation with high output;
• Computer PLC programming control, servo drive, good operation stability and low failure rate;
• Automatic tension control, used for unwinding non-woven coiled materials to ensure balanced feeding tension;
• Optical fiber sensor detects raw materials to avoid defective products due to lack of materials and reduce waste;
• The welding joint pattern of the mask body can be specified by the customer, and masks of different sizes and styles can be produced by changing the mold;
• The whole machine adopts aluminum alloy structure, which is beautiful and firm without rust.
Applicable material specifications
|
Item |
Number of hanging shafts |
Width (mm) |
Coil length (mm) |
Barrel inner diameter (mm) |
Weight |
|
Cloth |
3 |
170-200 |
Φ600 |
φ76.2 |
Max 15kg |
|
Nose clip strip |
1 |
3-7 |
Φ400 |
φ76.2 |
Max 25kg |
|
Ear loop |
4 |
3 |
- |
- |
- |
• High stability, low failure rate, beautiful appearance without rust
• Computer PLC programming control, servo drive, high degree of automation;
• Photoelectric detection of raw materials to avoid mistakes and reduce waste.
• The main conveyor adopts single-phase motor for conveying, and the stepping motor is turned over. The transmission is precise, the control is stable, and the speed is adjustable.
Equipment installation environment requirements
• Independent grounding, reliable grounding, grounding resistance less than 100 ohm;
• Power supply voltage: AC220 ± 10% v; frequency: 50 ± 1Hz; total power: about 8.5kw;
• Environment temperature: 0 ºC ~ 45 ºC; humidity: less than 90%; moisture condensation is not allowed within the temperature change range;
• Environment: Avoid too much dust and corrosive gases such as acid and alkali in the use environment; avoid sun and rain to prevent affecting the performance of the equipment;
• Install the equipment on a firm, reliable, non deformable and flat concrete foundation to avoid abnormal vibration environment;
• Air source requirements: 1, Pressure requirements: 0.5-0.8 MPa 2, Compressed air shall be dry, clean and free of oil mist, water vapor, etc
Online automatic packaging achieves manufacturing process integration
We have achieved the integration of automation and production, providing production visualization, HMI touch-screen controlling, automatic complete making including nose holder inserting, pattern welding, ear loop welding, size & shape cutting, sponge strips sticking, etc., automatic ink jet and UV printing, deviation correction system, and online packaging system. Highly automatic control ensures the production process is more sustainable, accurate, energy-efficient, making you worry-free about all process.
The main components of the mask machine
Feeding System
This is the part that will automatically feed the surgical mask making machine with the raw materials.
It is capable of determining the right quantities and sizes that it should feed into the machine.
Electrical System
This is the main unit that will provide the surgical mask making machine with enough power to operate the machine.
It has fuses and switches that will control the amount of power flowing through the machine.
Moulding System
This system consists of different types of parts that are responsible for cutting and shaping of the surgical masks.
It is capable of determining the right size of the surgical mask that you need according to the programming details.
Welding and Stitching System
This is the part of the machine that is responsible for piecing all the parts of the mask together.
It can either stitch the parts of the mask together using different stitching techniques.
Apart from that, you can depend on it to weld the ear loops of the surgical masks together.
Transport System
You will depend on the transport system consisting of guard rails and conveyor systems to move the material through various stations.
It will also move the final products all the way to the discharge port.
Printing System
The machine has the capability of printing the surgical masks with different forms of information.
It depends on the printing system to mark the surgical masks with verified information.
Inspection System
As soon as the manufacturing process is complete, the machine has to inspect the quality of the surgical masks.
It depends on the inspection unit to check the quality of surgical masks according to the production specifications.
Apart from that, it will also sort them out into various shapes and sizes before going through the discharge unit.
Discharge Unit
You will receive the final surgical mask from the surgical mask making machine through the discharge unit.
This is the part of the machine that will release the final product for further processing such as packaging.
• Free product warranty for one year.
• A pack of wearing parts is provided for free.
• Provide English installation instructions and circuit diagrams.
• Provide complete installation video guidance and parts assembly video, multi-language explanation.
• In some countries, there are cooperative agents that provide spare parts warehouses and provide long-term service sales.
• A remote guidance sales service team to provide 24-hour online guidance services for engineers.
FAQ
We're professional mask making machine manufacturers and suppliers in China for over 10 years, specialized in providing high quality machines with competitive price. We warmly welcome you to wholesale durable mask making machine made in China here from our factory.
