Mask making machine maintenance
It is very important that the mask equipment is purchased and maintained. The primary maintenance is in place. The equipment is also smooth during operation. The manufactured masks meet the standards. Doing this detail has a very large impact area. Check the common problems and solutions below the mask making machine:
I. Appearance:
Masks are used on our faces, and some are even used in the operating room, so the production of masks requires a mask making machine to be cleaned daily. At the end of each day, you can organize personnel to clean the work surface of the equipment and the plates that hold masks after the power is turned off. Be careful not to use water, oil, and other non-toxic and volatile cleaning liquids such as alcohol.
Second, the ultrasonic system: mask making machine
Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, and welding head must be cleaned monotonously without water, and the connection line is healthy. Frequently check the wear of the ultrasonic welding head (mold). mask making machine pays attention to whether the voltmeter and ammeter pointers on the ultrasonic electric box are normal.
3. Transmission system:
The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts, etc. Maintenance requirements of the mask making machine check whether the surface of the motor is dusty and other things that affect heat dissipation. Are the gears and sprockets oiled or attached . Is the chain tightness appropriate? Is there any foreign matter? Is the connecting screw of each transmission part loose? Is the reducer's lubricating oil sufficient? Usually, it needs to be replaced once every 1000 hours-1500 hours.
Fourth, the electrical system: mask making machine
Check whether the circuit connector of the mask making machine is loose. Is the main power cable, branch signal cable, etc. worn? Are they worn out? mask making machine
