Why does the vacuum packaging machine not evacuate?
The actual operation process of a vacuum packaging machine is generally divided into three steps, vacuuming, sealing and cooling. These three parts together constitute the entire workflow of the vacuum packaging machine. However, customers often report that the vacuum packaging machine will not evacuate during the actual work. So why is this happening? Based on past work experience, the packaging machine will share the solution of this malfunction with you as follows.
First, you should judge whether it is the wrong power supply. This situation is only applicable to vacuum packaging machines with three power supplies of 380v. This vacuum packaging machine will be connected in reverse when it is used for the first time or when it is moved. At this time, the performance is not to vacuum. If you are a new machine or after moving the machine, you only need to disconnect and replace any two of the wires.
Secondly, after confirming that there is no problem with the power supply, you should also check the settings of the control panel. General users will not have problems with the settings, but there is a small link that users will ignore, that is, they must return to the main interface of the machine after all parameters are set Work normally, otherwise the machine may not work.
Finally, there is a case where the height of the vacuum chamber is insufficient. The lack of height here does not mean that it is much worse, but just a little bit, it is completely indistinguishable from the surface, but the performance of the machine is not to vacuum. At this time, you need to experiment with an empty bag. There is no problem, but when you cannot pump, it means that the height of the vacuum chamber is not enough.
